Integral Forged Construction
One-piece forging without internal defects, ensuring higher strength and toughness.
DIN 582 Lifting Eye Nut
- Standard: DIN 582
- Material: SUS304, SUS316, SUS410, Carbon Steel
- Thread Size: M8-M100
- Surface Treatment: Plain, Zinc Plated, HDG, Dacromet, Ruspert
- Min Order: 5000pcs
- Sample: Free sample (after quote)
- Delivery time: 30 – 45 Days
Product Overview
Product Application
DIN 582 refers to lifting eye nuts. They are the official companion parts to DIN 580 lifting eye bolts and are widely used on the tops of large machinery, electric motors, control cabinets, gearboxes, and other equipment as permanent or temporary lifting anchor points.
It is widely used in machinery, steel structures, and industrial transport systems where removable lifting points are required.
Draw
Specification
Safety Notes
- Must be fully seated against mating surface
- Not suitable for shock loads
- Do not exceed the rated Working Load Limit (WLL)
- Angle loading reduces capacity significantly
Product Advantages
Precision-Machined Bearing Surface
Fine-milled contact face for uniform load distribution and reliable load-bearing performance.
Standard Interchangeability
Fully compliant with metric standards, directly compatible with standard bolts, studs, and threaded rods.
Common Questions
What is the primary industrial application of a DIN 582 eye nut?
Heavy-duty rigging, lifting machinery, and securing cargo by providing a reliable, female-threaded structural attachment point.
How does the load capacity change between vertical and angular lifting?
Axial vertical lifts (0°) deliver maximum Working Load Limit (WLL). Side pulls up to 45° reduce the WLL by approximately 30%.
Is lifting at an angle greater than 45° permitted under DIN 582?
No. Lifting beyond 45° from the vertical axis is strictly prohibited due to severe bending stress on the base.
Can DIN 582 eye nuts be reused indefinitely?
No. They must be inspected regularly and decommissioned immediately if they show signs of deformation, thread wear, cracks, or visible corrosion.
